Select Your Vehicle
Choose a Year for your vehicle
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
2011
2010
2009
2008
2007
2006
2005
2004
2003
2002
2001
2000
1999
Part Name
Category
Year
Drive Type
Make
Model
Brand
Engine
Submodel
Body
Transmission
Position
Doors
Filter
Part Name
Category
Year
Drive Type
Make
Model
Brand
Engine
Submodel
Body
Transmission
Position
Doors
Disc Brake Caliper
Showing 1 – 10 products of 15,716 products
Cardone
Unloaded Caliper w/Bracket - Disc Brake Caliper - Rear Left Cardone
Unloaded Caliper w/Bracket - Rear Left
Before 10/2000 with Metal Piston Supplied with Mounting Bracket Installation Hardware Included
Vehicle Info Required to Guarantee Fit
Add Vehicle
Product Attributes:
- Bleeder Port Size: M10x1.0
- Brake Caliper Finish: Oil Emulsion
- Caliper Color: Gray
- E-Waste: No
- FAQs:
- A Silicone Grease Is Used On Floating Caliper Mounting Pins.
- A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
- As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
- Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
- Brakes Squeal All Of The Time. What's Causing The Squeal?
- Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
- Car Pulls To One Side During Braking. Why?
- Could Calipers Be The Cause Of A Low Brake Pedal?
- Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
- Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
- New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
- Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
- What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
- What Type Of Grease Is Used On Floating Caliper Mounting Pins?
- Features and Benefits:
- A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
- As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
- Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
- Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
- New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
- New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
- New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
- New Washers Are Included Where Applicable For A Proper Seal.
- Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
- Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
- Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
- Inlet Port Size: M10x1.0
- Installation Hardware Included: Yes
- Mounting Bolts Included: No
- Package Contents: Caliper; Bracket; Hardware Kit
- Pads Included: No
- Piston Material: Steel
- Piston Size (OD) (mm): 33.909
- Product Condition: Remanufactured
- Grade: Best
with Metal Piston
Supplied with Mounting Bracket
Installation Hardware Included
| Vehicle | Position |
|---|---|
| 2000 Nissan Maxima | Rear Left |
| 1999 Nissan Maxima | Rear Left |
| 1998 Nissan Maxima | Rear Left |
| 1997 Nissan Maxima | Rear Left |
| 1996 Nissan Maxima | Rear Left |
| 1995 Nissan Maxima | Rear Left |
Before 10/2000
with Metal Piston
Supplied with Mounting Bracket
Installation Hardware Included
| Vehicle | Position |
|---|---|
| 2001 Nissan Maxima | Rear Left |
Cardone
Unloaded Caliper w/Bracket - Disc Brake Caliper - Rear Right Cardone
Unloaded Caliper w/Bracket - Rear Right
Before 10/2000 with Metal Piston Supplied with Mounting Bracket Installation Hardware Included
Vehicle Info Required to Guarantee Fit
Add Vehicle
Product Attributes:
- Bleeder Port Size: M10x1.0
- Brake Caliper Finish: Oil Emulsion
- Caliper Color: Gray
- E-Waste: No
- FAQs:
- A Silicone Grease Is Used On Floating Caliper Mounting Pins.
- A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
- As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
- Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
- Brakes Squeal All Of The Time. What's Causing The Squeal?
- Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
- Car Pulls To One Side During Braking. Why?
- Could Calipers Be The Cause Of A Low Brake Pedal?
- Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
- Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
- New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
- Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
- What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
- What Type Of Grease Is Used On Floating Caliper Mounting Pins?
- Features and Benefits:
- A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
- As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
- Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
- Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
- New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
- New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
- New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
- New Washers Are Included Where Applicable For A Proper Seal.
- Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
- Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
- Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
- Inlet Port Size: M10x1.0
- Installation Hardware Included: Yes
- Mounting Bolts Included: No
- Package Contents: Caliper; Bracket; Hardware Kit
- Pads Included: No
- Piston Material: Steel
- Piston Size (OD) (mm): 33.909
- Product Condition: Remanufactured
- Grade: Best
with Metal Piston
Supplied with Mounting Bracket
Installation Hardware Included
| Vehicle | Position |
|---|---|
| 2000 Nissan Maxima | Rear Right |
| 1999 Nissan Maxima | Rear Right |
| 1998 Nissan Maxima | Rear Right |
| 1997 Nissan Maxima | Rear Right |
| 1996 Nissan Maxima | Rear Right |
| 1995 Nissan Maxima | Rear Right |
Before 10/2000
with Metal Piston
Supplied with Mounting Bracket
Installation Hardware Included
| Vehicle | Position |
|---|---|
| 2001 Nissan Maxima | Rear Right |
Cardone
Unloaded Caliper - Disc Brake Caliper - Front Right Cardone
Unloaded Caliper - Front Right
with Metal Piston Installation Hardware Included
Vehicle Info Required to Guarantee Fit
Add Vehicle
Product Attributes:
- Bleeder Port Size: M10x1.5
- Brake Caliper Finish: Oil Emulsion
- Caliper Color: Gray
- E-Waste: No
- FAQs:
- A Silicone Grease Is Used On Floating Caliper Mounting Pins.
- A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
- As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
- Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
- Brakes Squeal All Of The Time. What's Causing The Squeal?
- Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
- Car Pulls To One Side During Braking. Why?
- Could Calipers Be The Cause Of A Low Brake Pedal?
- Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
- Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
- New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
- Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
- What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
- What Type Of Grease Is Used On Floating Caliper Mounting Pins?
- Features and Benefits:
- A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
- As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
- Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
- Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
- New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
- New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
- New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
- New Washers Are Included Where Applicable For A Proper Seal.
- Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
- Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
- Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
- Inlet Port Size: M10x1.5
- Installation Hardware Included: Yes
- Mounting Bolts Included: Yes
- Package Contents: Caliper; Hardware Kit
- Pads Included: No
- Piston Material: Steel
- Piston Size (OD) (in): 2.935
- Piston Size (OD) (mm): 74.549
- Product Condition: Remanufactured
- Grade: Better
| Vehicle | Drive Type | Fuel Type | Position |
|---|---|---|---|
| 1997 Chevrolet Astro | AWD | Front Right | |
| 1996 Chevrolet Astro | AWD | Front Right | |
| 1991 Chevrolet Astro | AWD | Front Right | |
| 1995 Chevrolet C1500 | Front Right | ||
| 1996 Chevrolet C1500 Suburban | GAS | Front Right | |
| 1988 Chevrolet C2500 | Front Right | ||
| 1995 Chevrolet K1500 | Front Right | ||
| 1993 Chevrolet K1500 | Front Right | ||
| 1998 Chevrolet K1500 Suburban | GAS | Front Right | |
| 1997 Chevrolet K1500 Suburban | GAS | Front Right | |
| 1988 Chevrolet K2500 | Front Right |
Cardone
Unloaded Caliper w/Bracket - Disc Brake Caliper - Front Left Cardone
Unloaded Caliper w/Bracket - Front Left
with Metal Piston Supplied with Mounting Bracket Installation Hardware Included
Vehicle Info Required to Guarantee Fit
Add Vehicle
Product Attributes:
- Bleeder Port Size: M10x1.0
- Brake Caliper Finish: Oil Emulsion
- Caliper Color: Gray
- E-Waste: No
- FAQs:
- A Silicone Grease Is Used On Floating Caliper Mounting Pins.
- A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
- As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
- Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
- Brakes Squeal All Of The Time. What's Causing The Squeal?
- Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
- Car Pulls To One Side During Braking. Why?
- Could Calipers Be The Cause Of A Low Brake Pedal?
- Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
- Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
- New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
- Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
- What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
- What Type Of Grease Is Used On Floating Caliper Mounting Pins?
- Features and Benefits:
- A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
- As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
- Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
- Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
- New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
- New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
- New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
- New Washers Are Included Where Applicable For A Proper Seal.
- Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
- Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
- Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
- Inlet Port Size: M10x1.0
- Installation Hardware Included: Yes
- Mounting Bolts Included: No
- Package Contents: Caliper; Bracket; Hardware Kit
- Pads Included: No
- Piston Material: Steel
- Piston Size (OD) (mm): 57.15
- Product Condition: Remanufactured
- Grade: Best
without Brembo Brake System
with Metal Piston
Supplied with Mounting Bracket
Installation Hardware Included
| Vehicle | Submodel | Position | Block | Engine | CID | CC |
|---|---|---|---|---|---|---|
| 2006 Nissan Sentra | SE-R Spec V | Front Left | L | 4 Cyl 2.5L | 152 | 2488 |
| 2005 Nissan Sentra | SE-R Spec V | Front Left | L | 4 Cyl 2.5L | 152 | 2488 |
| 2004 Nissan Sentra | SE-R Spec V | Front Left | L | 4 Cyl 2.5L | 152 | 2488 |
with Metal Piston
Supplied with Mounting Bracket
Installation Hardware Included
| Vehicle | Submodel | Position | Block | Engine | CID | CC |
|---|---|---|---|---|---|---|
| 1999 Nissan Altima | Front Left | |||||
| 1996 Nissan Altima | Front Left | |||||
| 2003 Nissan Sentra | Front Left | L | 4 Cyl 2.5L | 152 | 2488 | |
| 2001 Nissan Sentra | Front Left | L | 4 Cyl 2.0L | 122 | 1998 | |
| 1999 Nissan Maxima | Front Left | |||||
| 1998 Nissan Maxima | Front Left | |||||
| 1990 Nissan Maxima | Front Left | |||||
| 1989 Nissan Maxima | Front Left |
Cardone
Unloaded Caliper - Disc Brake Caliper - Front Right Cardone
Unloaded Caliper - Front Right
GM Brake Code J55 with Metal Piston GM Brake Codes are on the "Service Parts Identification" Sticker Installation Hardware Included
Vehicle Info Required to Guarantee Fit
Add Vehicle
Product Attributes:
- Bleeder Port Size: M10x1.5
- Brake Caliper Finish: Oil Emulsion
- Caliper Color: Gray
- E-Waste: No
- FAQs:
- A Silicone Grease Is Used On Floating Caliper Mounting Pins.
- A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
- As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
- Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
- Brakes Squeal All Of The Time. What's Causing The Squeal?
- Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
- Car Pulls To One Side During Braking. Why?
- Could Calipers Be The Cause Of A Low Brake Pedal?
- Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
- Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
- New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
- Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
- What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
- What Type Of Grease Is Used On Floating Caliper Mounting Pins?
- Features and Benefits:
- A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
- As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
- Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
- Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
- New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
- New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
- New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
- New Washers Are Included Where Applicable For A Proper Seal.
- Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
- Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
- Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
- Inlet Port Size: M10x1.5
- Installation Hardware Included: Yes
- Mounting Bolts Included: Yes
- Package Contents: Caliper; Hardware Kit
- Pads Included: No
- Piston Material: Steel
- Piston Size (OD) (in): 2.935
- Piston Size (OD) (mm): 74.549
- Product Condition: Remanufactured
- Grade: Better
with 2-15/16" Piston
with Metal Piston
Installation Hardware Included
| Vehicle | Body | Position | Drive Type |
|---|---|---|---|
| 1989 Chevrolet K1500 | Extended Cab Pickup | Front Left | |
| 1988 Chevrolet K1500 | Extended Cab Pickup | Front Left | |
| 1989 GMC K1500 | Extended Cab Pickup | Front Left |
with 7200 lb Gross Vehicle Weight (GVW)
with 2-15/16" Piston
with Metal Piston
Installation Hardware Included
| Vehicle | Body | Position | Drive Type |
|---|---|---|---|
| 1998 Chevrolet C2500 | Front Left | ||
| 1992 GMC C2500 | Front Left |
GM Brake Code J55
with Metal Piston
GM Brake Codes are on the "Service Parts Identification" Sticker
Installation Hardware Included
| Vehicle | Body | Position | Drive Type |
|---|---|---|---|
| 1991 Cadillac Commercial Chassis | Front Right | ||
| 1990 Cadillac Commercial Chassis | Front Right | ||
| 1992 Cadillac Commercial Chassis | Front Right | FWD | |
| 1991 Cadillac DeVille | Front Right | ||
| 1990 Cadillac DeVille | Front Right | ||
| 1991 Cadillac Fleetwood | Front Right | FWD |
Cardone
Unloaded Caliper w/Bracket - Disc Brake Caliper - Front Right Cardone
Unloaded Caliper w/Bracket - Front Right
with Metal Piston Supplied with Mounting Bracket Installation Hardware Included
Vehicle Info Required to Guarantee Fit
Add Vehicle
Product Attributes:
- Bleeder Port Size: M10x1.0
- Brake Caliper Finish: Oil Emulsion
- Caliper Color: Gray
- E-Waste: No
- FAQs:
- A Silicone Grease Is Used On Floating Caliper Mounting Pins.
- A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
- As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
- Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
- Brakes Squeal All Of The Time. What's Causing The Squeal?
- Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
- Car Pulls To One Side During Braking. Why?
- Could Calipers Be The Cause Of A Low Brake Pedal?
- Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
- Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
- New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
- Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
- What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
- What Type Of Grease Is Used On Floating Caliper Mounting Pins?
- Features and Benefits:
- A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
- As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
- Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
- Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
- New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
- New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
- New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
- New Washers Are Included Where Applicable For A Proper Seal.
- Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
- Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
- Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
- Inlet Port Size: M10x1.0
- Installation Hardware Included: Yes
- Mounting Bolts Included: No
- Package Contents: Caliper; Bracket; Hardware Kit
- Pads Included: No
- Piston Material: Steel
- Piston Size (OD) (mm): 57.15
- Product Condition: Remanufactured
- Grade: Best
without Brembo Brake System
with Metal Piston
Supplied with Mounting Bracket
Installation Hardware Included
| Vehicle | Submodel | Position | Block | Engine | CID | CC |
|---|---|---|---|---|---|---|
| 2006 Nissan Sentra | SE-R Spec V | Front Right | L | 4 Cyl 2.5L | 152 | 2488 |
| 2005 Nissan Sentra | SE-R Spec V | Front Right | L | 4 Cyl 2.5L | 152 | 2488 |
| 2004 Nissan Sentra | SE-R Spec V | Front Right | L | 4 Cyl 2.5L | 152 | 2488 |
with Metal Piston
Supplied with Mounting Bracket
Installation Hardware Included
| Vehicle | Submodel | Position | Block | Engine | CID | CC |
|---|---|---|---|---|---|---|
| 2001 Nissan Altima | Front Right | |||||
| 1999 Nissan Altima | Front Right | |||||
| 1995 Nissan Altima | Front Right | |||||
| 1994 Nissan Altima | Front Right | |||||
| 1993 Nissan Altima | Front Right | |||||
| 2002 Nissan Sentra | Front Right | L | 4 Cyl 2.5L | 152 | 2488 | |
| 2004 Nissan Sentra | S | Front Right | L | 4 Cyl 2.5L | 152 | 2488 |
| 1998 Nissan Maxima | Front Right |
Cardone
Unloaded Caliper w/Bracket - Disc Brake Caliper - Rear Left Cardone
Unloaded Caliper w/Bracket - Rear Left
with Single Piston Caliper with Metal Piston Supplied with Mounting Bracket Installation Hardware Included
Vehicle Info Required to Guarantee Fit
Add Vehicle
Product Attributes:
- Bleeder Port Size: M7x1.0
- Brake Caliper Finish: Oil Emulsion
- Caliper Color: Gray
- E-Waste: No
- FAQs:
- A Silicone Grease Is Used On Floating Caliper Mounting Pins.
- A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
- As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
- Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
- Brakes Squeal All Of The Time. What's Causing The Squeal?
- Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
- Car Pulls To One Side During Braking. Why?
- Could Calipers Be The Cause Of A Low Brake Pedal?
- Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
- Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
- New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
- Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
- What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
- What Type Of Grease Is Used On Floating Caliper Mounting Pins?
- Features and Benefits:
- A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
- As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
- Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
- Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
- New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
- New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
- New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
- New Washers Are Included Where Applicable For A Proper Seal.
- Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
- Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
- Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
- Inlet Port Size: M10x1.0
- Installation Hardware Included: Yes
- Mounting Bolts Included: No
- Package Contents: Caliper; Bracket; Hardware Kit
- Pads Included: No
- Piston Material: Steel
- Piston Size (OD) (mm): 42.7228
- Product Condition: Remanufactured
- Grade: Best
with Metal Piston
Supplied with Mounting Bracket
Installation Hardware Included
| Vehicle | Position |
|---|---|
| 2007 Nissan Murano | Rear Left |
| 2005 Nissan Murano | Rear Left |
| 2004 Nissan Murano | Rear Left |
| 2003 Nissan Murano | Rear Left |
| 2009 Nissan Quest | Rear Left |
| 2007 Nissan Quest | Rear Left |
| 2005 Nissan Quest | Rear Left |
| 2004 Nissan Quest | Rear Left |
with Single Piston Caliper
with Metal Piston
Supplied with Mounting Bracket
Installation Hardware Included
| Vehicle | Position |
|---|---|
| 2005 Nissan 350Z | Rear Left |
| 2004 Nissan 350Z | Rear Left |
| 2003 Nissan 350Z | Rear Left |
Cardone
Unloaded Caliper - Disc Brake Caliper - Front Right Cardone
Unloaded Caliper - Front Right
with Metal Piston Installation Hardware Included
Vehicle Info Required to Guarantee Fit
Add Vehicle
Product Attributes:
- Bleeder Port Size: M7x1.0
- Brake Caliper Finish: Oil Emulsion
- Caliper Color: Gray
- E-Waste: No
- FAQs:
- A Silicone Grease Is Used On Floating Caliper Mounting Pins.
- A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
- As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
- Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
- Brakes Squeal All Of The Time. What's Causing The Squeal?
- Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
- Car Pulls To One Side During Braking. Why?
- Could Calipers Be The Cause Of A Low Brake Pedal?
- Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
- Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
- New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
- Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
- What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
- What Type Of Grease Is Used On Floating Caliper Mounting Pins?
- Features and Benefits:
- A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
- As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
- Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
- Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
- New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
- New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
- New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
- New Washers Are Included Where Applicable For A Proper Seal.
- Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
- Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
- Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
- Inlet Port Size: M10x1.0
- Installation Hardware Included: Yes
- Mounting Bolts Included: No
- Package Contents: Caliper; Hardware Kit
- Pads Included: No
- Piston Material: Steel
- Piston Quantity: 4
- Piston Size (OD) (mm): 45.3136
- Product Condition: Remanufactured
- Grade: Better
Casting # 13WG
with Metal Piston
Check position of caliper prior to removal of old unit
Installation Hardware Included
| Vehicle | Position |
|---|---|
| 2006 Toyota Tundra | Front Left |
| 2005 Toyota Tundra | Front Left |
| 2004 Toyota Tundra | Front Left |
| 2003 Toyota Tundra | Front Left |
| 2002 Toyota Tundra | Front Left |
| 2001 Toyota Tundra | Front Left |
| 2000 Toyota Tundra | Front Left |
Casting # 13WG
with Metal Piston
Installation Hardware Included
| Vehicle | Position |
|---|---|
| 2009 Toyota 4Runner | Front Right |
with Metal Piston
Installation Hardware Included
| Vehicle | Position |
|---|---|
| 2014 Toyota FJ Cruiser | Front Right |
| 2010 Toyota FJ Cruiser | Front Right |
| 2007 Toyota FJ Cruiser | Front Right |
Cardone
Unloaded Caliper w/Bracket - Disc Brake Caliper - Rear Left Cardone
Unloaded Caliper w/Bracket - Rear Left
with Metal Piston Supplied with Mounting Bracket Installation Hardware Included
Vehicle Info Required to Guarantee Fit
Add Vehicle
Product Attributes:
- Bleeder Port Size: M10x1.25
- Brake Caliper Finish: Oil Emulsion
- Caliper Color: Gray
- E-Waste: No
- FAQs:
- A Silicone Grease Is Used On Floating Caliper Mounting Pins.
- A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
- As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
- Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
- Brakes Squeal All Of The Time. What's Causing The Squeal?
- Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
- Car Pulls To One Side During Braking. Why?
- Could Calipers Be The Cause Of A Low Brake Pedal?
- Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
- Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
- New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
- Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
- What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
- What Type Of Grease Is Used On Floating Caliper Mounting Pins?
- Features and Benefits:
- A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
- As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
- Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
- Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
- New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
- New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
- New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
- New Washers Are Included Where Applicable For A Proper Seal.
- Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
- Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
- Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
- Inlet Port Size: M10x1.0
- Installation Hardware Included: Yes
- Mounting Bolts Included: No
- Package Contents: Caliper; Bracket; Hardware Kit
- Pads Included: No
- Piston Material: Steel
- Piston Size (OD) (mm): 33.8836
- Product Condition: Remanufactured
- Grade: Best
| Vehicle | Submodel | Body | Position | Block | Engine | CID | CC |
|---|---|---|---|---|---|---|---|
| 2006 Acura TSX | Rear Left | ||||||
| 2005 Acura TSX | Rear Left | ||||||
| 2007 Honda Accord | Special Edition | Rear Left | |||||
| 2005 Honda Accord | DX | Rear Left | |||||
| 2007 Honda Accord | EX | Rear Left | |||||
| 2006 Honda Accord | EX | Rear Left | |||||
| 2006 Honda Accord | LX Special Edition | Rear Left | |||||
| 2000 Honda Accord | Sedan | Rear Left | V | 6 Cyl 3.0L | - | 2997 | |
| 2003 Honda Accord | Rear Left | ||||||
| 2007 Honda Accord | Value Package | Rear Left | |||||
| 2006 Honda Accord | LX | Rear Left |
Cardone
Unloaded Caliper - Disc Brake Caliper - Front Left Cardone
Unloaded Caliper - Front Left
4 Piston with Metal Piston Installation Hardware Included
Vehicle Info Required to Guarantee Fit
Add Vehicle
Product Attributes:
- Bleeder Port Size: M7x1.0
- Brake Caliper Finish: Oil Emulsion
- Caliper Color: Gray
- E-Waste: No
- FAQs:
- A Silicone Grease Is Used On Floating Caliper Mounting Pins.
- A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
- As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
- Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
- Brakes Squeal All Of The Time. What's Causing The Squeal?
- Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
- Car Pulls To One Side During Braking. Why?
- Could Calipers Be The Cause Of A Low Brake Pedal?
- Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
- Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
- New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
- Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
- What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
- What Type Of Grease Is Used On Floating Caliper Mounting Pins?
- Features and Benefits:
- A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
- As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
- Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
- Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
- New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
- New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
- New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
- New Washers Are Included Where Applicable For A Proper Seal.
- Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
- Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
- Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
- Inlet Port Size: M10x1.0
- Installation Hardware Included: Yes
- Mounting Bolts Included: No
- Package Contents: Caliper; Hardware Kit
- Pads Included: No
- Piston Material: Steel
- Piston Quantity: 4
- Piston Size (OD) (mm): 45.3136
- Product Condition: Remanufactured
- Grade: Better
Casting # 13WG
with Metal Piston
Installation Hardware Included
| Vehicle | Position | Submodel | Drive Type | Block | Engine | CID | CC |
|---|---|---|---|---|---|---|---|
| 2008 Toyota 4Runner | Front Left | ||||||
| 2006 Toyota 4Runner | Front Left |
with Metal Piston
Installation Hardware Included
| Vehicle | Position | Submodel | Drive Type | Block | Engine | CID | CC |
|---|---|---|---|---|---|---|---|
| 2011 Toyota FJ Cruiser | Front Left | ||||||
| 2015 Toyota Tacoma | Front Left | 4WD | L | 4 Cyl 2.7L | - | 2694 | |
| 2012 Toyota Tacoma | Front Left | Pre Runner | V | 6 Cyl 4.0L | 241 | 3956 | |
| 2014 Toyota Tacoma | Front Left | V | 6 Cyl 4.0L | 241 | 3956 | ||
| 2017 Toyota Tacoma | Front Left | ||||||
| 2021 Toyota Tacoma | Front Left |
4 Piston
with Metal Piston
Installation Hardware Included
| Vehicle | Position | Submodel | Drive Type | Block | Engine | CID | CC |
|---|---|---|---|---|---|---|---|
| 2007 Toyota Tacoma | Front Left | TRD Sport Prerunner | V | 6 Cyl 4.0L | 241 | 3956 | |
| 2011 Toyota Tacoma | Front Left | Base | V | 6 Cyl 4.0L | 241 | 3956 | |
| 2008 Toyota Tacoma | Front Left | Base | V | 6 Cyl 4.0L | 241 | 3956 |
Showing 1 – 10 products of 15,716 products
