Select Your Vehicle
Choose a Year for your vehicle
Drive Axle Assembly
Showing 1 – 10 products of 13 products
Cardone
Drive Axle Assembly - Drive Axle Assembly - Rear Cardone
Drive Axle Assembly - Rear
without Limited Slip DSA Differential with 3.55 Axle Ratio (DMD) with 9.25" Ring Gear with 12 Axle Cover Bolts
- Bearings: New
- Brake Piston for Drum Brakes: No
- Brake Type: Drum
- Differential Type: Open
- E-Waste: Yes
- Emergency Brakes Included: No
- Exterior Finish: Black Powder Coat
- Features and Benefits:
- All Bearing Pre-loads Are Set And Housings And Shafts Are Inspected Using Precision Measuring Equipment.
- All Units Are 100% Tested For Gear Noise And Function.
- All Units Are Pressure-tested To Guarantee Leak-free Performance.
- All Units Come Pre-filled With Oil And An Oil Additive, When Required, On Axles With A Limited Slip Differential.
- Delivery To And Core Pickup From Your Shop Is Coordinated By Us, Free Of Charge.
- Each Unit Is Ready To Install, Saving Labor Time And Eliminating The Hassle Of Rebuilding The Original.
- Housing Is Powder-coated For Maximum Corrosion Protection That Further Enhances On Car Durability.
- O.e.-quality Ring And Pinion Gears Are Set Up For Correct Backlash And Gear Mesh Pattern.
- Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
- Supplied With Parking Brake Shoes And Complete Hardware. Backing Plate Tabs And Adjusters Are Pre-lubed Before Assembly.
- Units Are Remanufactured Using New O.e.-quality Bearings, Dust Shields, Seals And Gaskets.
- Units Are Shipped In Durable, Reusable Containers To Improve The Product’s Overall Sustainability And Facilitate Easier Core Returns.
- Number of Lug Bolts: 5
- Package Contents: Oil Filled Complete Axle Assembly, Break-in Procedure
- Prefilled with Oill: Yes
- Product Condition: Remanufactured
- Ratio: 3.55
- Ratio Note: Must Match Front Axle Ratio
- Ring Gear Diameter: 9.25"
- Seals: New
- Shaft Material: Steel
- Suspension Type: Leaf Spring
- Tone Ring: No
- Grade: Better
Vehicle | Drive Type | Position |
---|---|---|
1999 Dodge Ram 1500 | 4WD | Rear |
1998 Dodge Ram 1500 | 4WD | Rear |
1997 Dodge Ram 1500 | 4WD | Rear |
1996 Dodge Ram 1500 | 4WD | Rear |
1995 Dodge Ram 1500 | 4WD | Rear |
1994 Dodge Ram 1500 | 4WD | Rear |
Cardone
Drive Axle Assembly - Drive Axle Assembly - Rear Cardone
Drive Axle Assembly - Rear
with Limited Slip G80 Differential with Brake Code JF3 with 3.42 Axle Ratio (GU6) with 8.6" Ring Gear with 10 Axle Cover Bolts
- Bearings: New
- Brake Piston for Drum Brakes: No
- Brake Type: Drum
- Differential Type: Helical Limited Slip
- E-Waste: Yes
- Emergency Brakes Included: No
- Exterior Finish: Black Powder Coat
- Features and Benefits:
- All Bearing Pre-loads Are Set And Housings And Shafts Are Inspected Using Precision Measuring Equipment.
- All Units Are 100% Tested For Gear Noise And Function.
- All Units Are Pressure-tested To Guarantee Leak-free Performance.
- All Units Come Pre-filled With Oil And An Oil Additive, When Required, On Axles With A Limited Slip Differential.
- Delivery To And Core Pickup From Your Shop Is Coordinated By Us, Free Of Charge.
- Each Unit Is Ready To Install, Saving Labor Time And Eliminating The Hassle Of Rebuilding The Original.
- Housing Is Powder-coated For Maximum Corrosion Protection That Further Enhances On Car Durability.
- O.e.-quality Ring And Pinion Gears Are Set Up For Correct Backlash And Gear Mesh Pattern.
- Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
- Supplied With Parking Brake Shoes And Complete Hardware. Backing Plate Tabs And Adjusters Are Pre-lubed Before Assembly.
- Units Are Remanufactured Using New O.e.-quality Bearings, Dust Shields, Seals And Gaskets.
- Units Are Shipped In Durable, Reusable Containers To Improve The Product’s Overall Sustainability And Facilitate Easier Core Returns.
- Number of Cover Bolts: 10
- Number of Lug Bolts: 6
- Package Contents: Oil Filled Complete Axle Assembly, Break-in Procedure
- Prefilled with Oill: Yes
- Product Condition: Remanufactured
- Ratio: 3.42
- Ratio Note: Must Match Front Axle Ratio (if Applicable)
- Ring Gear Diameter: 8.5/8.6"
- Seals: New
- Shaft Material: Steel
- Suspension Type: Leaf Spring
- Tone Ring: No
- Grade: Better
Vehicle | Drive Type | Front Brake | Rear Brake | Position |
---|---|---|---|---|
2006 Chevrolet Silverado 1500 | 4WD | Disc | Drum | Rear |
2005 Chevrolet Silverado 1500 | 4WD | Disc | Drum | Rear |
2007 Chevrolet Silverado 1500 Classic | 4WD | Disc | Drum | Rear |
2006 GMC Sierra 1500 | 4WD | Disc | Drum | Rear |
2005 GMC Sierra 1500 | 4WD | Disc | Drum | Rear |
2007 GMC Sierra 1500 Classic | 4WD | Disc | Drum | Rear |
Cardone
Drive Axle Assembly - Drive Axle Assembly - Rear Cardone
Drive Axle Assembly - Rear
with Limited Slip DSA Differential with 3.92 Axle Ratio (DMH) with 9.25" Ring Gear with 12 Axle Cover Bolts
- Bearings: New
- Brake Piston for Drum Brakes: No
- Brake Type: Drum
- Differential Type: Limited Slip
- E-Waste: Yes
- Emergency Brakes Included: No
- Exterior Finish: Black Powder Coat
- Features and Benefits:
- All Bearing Pre-loads Are Set And Housings And Shafts Are Inspected Using Precision Measuring Equipment.
- All Units Are 100% Tested For Gear Noise And Function.
- All Units Are Pressure-tested To Guarantee Leak-free Performance.
- All Units Come Pre-filled With Oil And An Oil Additive, When Required, On Axles With A Limited Slip Differential.
- Delivery To And Core Pickup From Your Shop Is Coordinated By Us, Free Of Charge.
- Each Unit Is Ready To Install, Saving Labor Time And Eliminating The Hassle Of Rebuilding The Original.
- Housing Is Powder-coated For Maximum Corrosion Protection That Further Enhances On Car Durability.
- O.e.-quality Ring And Pinion Gears Are Set Up For Correct Backlash And Gear Mesh Pattern.
- Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
- Supplied With Parking Brake Shoes And Complete Hardware. Backing Plate Tabs And Adjusters Are Pre-lubed Before Assembly.
- Units Are Remanufactured Using New O.e.-quality Bearings, Dust Shields, Seals And Gaskets.
- Units Are Shipped In Durable, Reusable Containers To Improve The Product’s Overall Sustainability And Facilitate Easier Core Returns.
- Number of Lug Bolts: 5
- Package Contents: Oil Filled Complete Axle Assembly, Break-in Procedure
- Prefilled with Oill: Yes
- Product Condition: Remanufactured
- Ratio: 3.92
- Ratio Note: Must Match Front Axle Ratio
- Ring Gear Diameter: 9.25"
- Seals: New
- Shaft Material: Steel
- Suspension Type: Leaf Spring
- Tone Ring: No
- Grade: Better
Vehicle | Drive Type | Position |
---|---|---|
1999 Dodge Ram 1500 | 4WD | Rear |
1998 Dodge Ram 1500 | 4WD | Rear |
1997 Dodge Ram 1500 | 4WD | Rear |
1996 Dodge Ram 1500 | 4WD | Rear |
1995 Dodge Ram 1500 | 4WD | Rear |
1994 Dodge Ram 1500 | 4WD | Rear |
Dana Spicer Chassis
FSGR - Drive Axle Assembly - Front Dana Spicer Chassis
FSGR - Front
with 4.88 Gear Ratio with E-Locker with Ultimate Dana 44 Axle
Vehicle | Position |
---|---|
2012 Jeep Wrangler | Front |
2013 Jeep Wrangler | Front |
2014 Jeep Wrangler | Front |
2015 Jeep Wrangler | Front |
2016 Jeep Wrangler | Front |
2017 Jeep Wrangler | Front |
2018 Jeep Wrangler JK | Front |
2007 Jeep Wrangler | Front |
2008 Jeep Wrangler | Front |
2009 Jeep Wrangler | Front |
2010 Jeep Wrangler | Front |
Dana Spicer Chassis
FSGR - Drive Axle Assembly - Front Dana Spicer Chassis
FSGR - Front
with 4.88 Gear Ratio with Eaton Electronic Locker includes Brakes with Ultimate Dana 60 Axle with Ultimate Dana 60 Crate Axle
Vehicle | Position |
---|---|
2012 Jeep Wrangler | Front |
2013 Jeep Wrangler | Front |
2014 Jeep Wrangler | Front |
2015 Jeep Wrangler | Front |
2016 Jeep Wrangler | Front |
2017 Jeep Wrangler | Front |
2018 Jeep Wrangler JK | Front |
2008 Jeep Wrangler | Front |
2009 Jeep Wrangler | Front |
2010 Jeep Wrangler | Front |
2011 Jeep Wrangler | Front |
Dana Spicer Chassis
FSGR - Drive Axle Assembly - Rear Dana Spicer Chassis
FSGR - Rear
with 4.88 Ratio with Eaton Electronic Locker includes Brakes with Ultimate Dana 60 Axle with Ultimate Dana 60 Crate Axle
Vehicle | Position |
---|---|
2012 Jeep Wrangler | Rear |
2013 Jeep Wrangler | Rear |
2014 Jeep Wrangler | Rear |
2015 Jeep Wrangler | Rear |
2016 Jeep Wrangler | Rear |
2017 Jeep Wrangler | Rear |
2007 Jeep Wrangler | Rear |
2008 Jeep Wrangler | Rear |
2009 Jeep Wrangler | Rear |
2010 Jeep Wrangler | Rear |
2011 Jeep Wrangler | Rear |
Dana Spicer Chassis
FSGR - Drive Axle Assembly - Front Dana Spicer Chassis
FSGR - Front
with 5.38 Gear Ratio with Eaton Electronic Locker with Ultimate Dana 60 Axle with Ultimate Dana 60 Crate Axle
Vehicle | Position |
---|---|
2012 Jeep Wrangler | Front |
2013 Jeep Wrangler | Front |
2014 Jeep Wrangler | Front |
2015 Jeep Wrangler | Front |
2016 Jeep Wrangler | Front |
2017 Jeep Wrangler | Front |
2018 Jeep Wrangler JK | Front |
2007 Jeep Wrangler | Front |
2008 Jeep Wrangler | Front |
2009 Jeep Wrangler | Front |
2010 Jeep Wrangler | Front |
Dana Spicer Chassis
FSGR - Drive Axle Assembly - Rear Dana Spicer Chassis
FSGR - Rear
with 5.38 Gear Ratio with Electronic Locker with Ultimate Dana 60 Axle with Ultimate Dana 60 Crate Axle
Vehicle | Position |
---|---|
2018 Jeep Wrangler | Rear |
2019 Jeep Wrangler | Rear |
2020 Jeep Wrangler | Rear |
Spicer
FSGR - Drive Axle Assembly - Rear Spicer
FSGR - Rear
Ultimate Dana 60 Crate Axle - Jeep Wrangler JL - Rear 5.38 ELD
with Ultimate Dana 60 Crate Axle with 5.38 Gear Ratio with Electronic Locker with Ultimate Dana 60 Axle
- Axle Model: Dana 60
- Axle Shaft Material: Chromoly
- Axle Shaft U Joint Series: Spl70
- Brakes Included: Y
- Drive Shaft U Joint Series: 1350
- End Yoke Style: Half Round
- Gear Ratio: 5.38
- Hub Surface to Hub Surface(IN): 69.000
- Inner Axle Shaft Spline Count: 35
- Mounting Bracket Included: Y
- Outer Axle Spline Count: 35
- Traction Device: Eaton Electronic Locker
- Vehicle Location: Rear
- Wheel Bolt Pattern: 8 X 6.5
-
Features:
- Spicer 10 inch ring gears inside.
- 14" disc brakes with dual piston calipers.
- High-strength heavy gauge brackets.
- Plug and play with your factory ABS.
Vehicle | Position |
---|---|
2018 Jeep Wrangler | Rear |
2019 Jeep Wrangler | Rear |
2020 Jeep Wrangler | Rear |
2021 Jeep Wrangler | Rear |
2022 Jeep Wrangler | Rear |
Spicer
FSGR - Drive Axle Assembly - Front Spicer
FSGR - Front
Ultimate Dana 60 Crate Axle - Jeep Wrangler JK - Rear 5.38 ELD
with Ultimate Dana 60 Crate Axle with 5.38 Gear Ratio with Eaton Electronic Locker with Ultimate Dana 60 Axle
- Axle Model: Dana 60
- Axle Shaft Material: Chromoly
- Axle Shaft U Joint Series: Spl70
- Brakes Included: Y
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Drive Shaft U Joint Series: 1350
- End Yoke Style: Half Round
- Gear Ratio: 5.38
- Hub Surface to Hub Surface(IN): 69.000
- Inner Axle Shaft Spline Count: 35
- Mounting Bracket Included: Y
- Outer Axle Spline Count: 35
- Traction Device: Eaton Electronic Locker
- Vehicle Location: Rear
- Wheel Bolt Pattern: 8 X 6.5
-
Features:
- Spicer 10 inch ring gears inside.
- 14 inch disc brakes with dual piston calipers.
- High-strength heavy gauge brackets
- Plug and play with your factory ABS.
Vehicle | Position |
---|---|
2012 Jeep Wrangler | Front |
2013 Jeep Wrangler | Front |
2014 Jeep Wrangler | Front |
2015 Jeep Wrangler | Front |
2016 Jeep Wrangler | Front |
2017 Jeep Wrangler | Front |
2018 Jeep Wrangler JK | Front |
2007 Jeep Wrangler | Front |
2008 Jeep Wrangler | Front |
2010 Jeep Wrangler | Front |
2011 Jeep Wrangler | Front |
Showing 1 – 10 products of 13 products