Select Your Vehicle
Choose a Year for your vehicle
Drive Shaft
Showing 1 – 10 products of 365 products
Cardone
Driveshaft / Prop Shaft - Drive Shaft - Front Cardone
Driveshaft / Prop Shaft - Front
with 36-1/2" (927 mm) Long Driveshaft Measurement taken from end of flange face to end of flange face Supplied as New
- Drive Shaft Material: Steel
- E-Waste: No
- Features and Benefits:
- 100% New Universal Joints Are Installed To Ensure Proper Fit And Optimal Performance.
- All Slip Yokes Are Lubricated To Prevent Premature Wear.
- Built To Match O.e. Form, Fit And Function.
- Units Are 100% Dynamically Balanced At 3200 Rpms For Vibration-free Operation And Increased Joint Life.
- Greasable: Yes
- Measurement Method: Measurement Taken From End Of Flange Face To End Of Flange Face
- Product Condition: New
- Tubing Outer Diameter (in): 2.5
- Tubing Outer Diameter (mm): 63.5
- Grade: Better
Vehicle | Transmission | Position | Block | Engine | CID | CC |
---|---|---|---|---|---|---|
2005 Dodge Ram 2500 | Manual | Front | L | 6 Cyl 5.9L | 359 | - |
2004 Dodge Ram 2500 | Manual | Front | L | 6 Cyl 5.9L | 359 | - |
2003 Dodge Ram 2500 | Manual | Front | L | 6 Cyl 5.9L | 359 | - |
2005 Dodge Ram 3500 | Manual | Front | L | 6 Cyl 5.9L | 359 | - |
2004 Dodge Ram 3500 | Manual | Front | L | 6 Cyl 5.9L | 359 | - |
2003 Dodge Ram 3500 | Manual | Front | L | 6 Cyl 5.9L | 359 | - |
Cardone
Driveshaft / Prop Shaft - Drive Shaft - Front Cardone
Driveshaft / Prop Shaft - Front
Heavy Duty with Dana Model 60 Axle with NV241HD Transfer Case with 28-3/4" (730 mm) Long Driveshaft Supplied as New Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
- Drive Shaft Material: Steel
- E-Waste: No
- Features and Benefits:
- 100% New Universal Joints Are Installed To Ensure Proper Fit And Optimal Performance.
- All Slip Yokes Are Lubricated To Prevent Premature Wear.
- Built To Match O.e. Form, Fit And Function.
- Units Are 100% Dynamically Balanced At 3200 Rpms For Vibration-free Operation And Increased Joint Life.
- Greasable: Yes
- Measurement Method: Measurement Is Taken From End Of The Flange To The Center Of U-joint On The Opposite Side
- Product Condition: New
- Tubing Outer Diameter (in): 2.5
- Tubing Outer Diameter (mm): 63.5
- Grade: Better
Vehicle | Transmission | Trans. Speed | Fuel Type | Position | Block | Engine | CID | CC |
---|---|---|---|---|---|---|---|---|
2002 Dodge Ram 3500 | Manual | 6 | GAS | Front | V | 8 Cyl 5.9L | 360 | - |
2001 Dodge Ram 3500 | Manual | 6 | GAS | Front | V | 8 Cyl 5.9L | 360 | - |
2000 Dodge Ram 3500 | Manual | 6 | GAS | Front | V | 8 Cyl 5.9L | 360 | - |
2002 Dodge Ram 3500 | Manual | 6 | Front | V | 10 Cyl 8.0L | 488 | 7990 | |
2001 Dodge Ram 3500 | Manual | 6 | Front | V | 10 Cyl 8.0L | 488 | 7990 | |
2000 Dodge Ram 3500 | Manual | 6 | Front | V | 10 Cyl 8.0L | 488 | 7990 |
Vehicle | Transmission | Trans. Speed | Fuel Type | Position | Block | Engine | CID | CC |
---|---|---|---|---|---|---|---|---|
2002 Dodge Ram 3500 | Manual | 6 | DIESEL | Front | L | 6 Cyl 5.9L | 359 | - |
2001 Dodge Ram 3500 | Manual | 6 | DIESEL | Front | L | 6 Cyl 5.9L | 359 | - |
2000 Dodge Ram 3500 | Manual | 6 | DIESEL | Front | L | 6 Cyl 5.9L | 359 | - |
Cardone
Driveshaft / Prop Shaft - Drive Shaft - Front Cardone
Driveshaft / Prop Shaft - Front
with 26-3/8" (670 mm) Long Driveshaft Measurement taken from end of flange face to end of CV joint flange face Supplied as New
- Drive Shaft Material: Steel
- E-Waste: No
- Features and Benefits:
- 100% New Universal Joints Are Installed To Ensure Proper Fit And Optimal Performance.
- All Slip Yokes Are Lubricated To Prevent Premature Wear.
- Built To Match O.e. Form, Fit And Function.
- Units Are 100% Dynamically Balanced At 3200 Rpms For Vibration-free Operation And Increased Joint Life.
- Greasable: No
- Measurement Method: Measurement Taken From End Of Flange Face To End Of Cv Joint Flange Face
- Product Condition: New
- Tubing Outer Diameter (in): 2.01
- Tubing Outer Diameter (mm): 51
- Grade: Better
Vehicle | Transmission | Trans. Speed | Drive Type | Position |
---|---|---|---|---|
2006 Dodge Dakota | Automatic | 5 | 4WD | Front |
2005 Dodge Dakota | Automatic | 5 | 4WD | Front |
2004 Dodge Dakota | 4WD | Front | ||
2003 Dodge Dakota | 4WD | Front | ||
2002 Dodge Dakota | 4WD | Front | ||
2001 Dodge Dakota | 4WD | Front | ||
2003 Dodge Durango | 4WD | Front | ||
2002 Dodge Durango | 4WD | Front | ||
2001 Dodge Durango | 4WD | Front | ||
2006 Mitsubishi Raider | Automatic | 5 | 4WD | Front |
Cardone
Driveshaft / Prop Shaft - Drive Shaft - Front Cardone
Driveshaft / Prop Shaft - Front
with 30-3/8" (771 mm) Long Driveshaft Measurement taken from end of CV joint flange face to end of CV joint flange face Supplied as New
- Drive Shaft Material: Steel
- E-Waste: No
- Features and Benefits:
- 100% New Universal Joints Are Installed To Ensure Proper Fit And Optimal Performance.
- All Slip Yokes Are Lubricated To Prevent Premature Wear.
- Built To Match O.e. Form, Fit And Function.
- Units Are 100% Dynamically Balanced At 3200 Rpms For Vibration-free Operation And Increased Joint Life.
- Greasable: No
- Measurement Method: Measurement Taken From End Of Cv Joint Flange Face To End Of Cv Joint Flange Face
- Product Condition: New
- Tubing Outer Diameter (in): 2.01
- Tubing Outer Diameter (mm): 51
- Grade: Better
Vehicle | Position | Block | Engine | CID | CC |
---|---|---|---|---|---|
2004 Jeep Liberty | Front | V | 6 Cyl 3.7L | 226 | - |
2003 Jeep Liberty | Front | V | 6 Cyl 3.7L | 226 | - |
2002 Jeep Liberty | Front | V | 6 Cyl 3.7L | 226 | - |
Cardone
Driveshaft / Prop Shaft - Drive Shaft - Front Cardone
Driveshaft / Prop Shaft - Front
with 24-3/8" (620 mm) Long Driveshaft Measurement taken from end of flange face to end of flange face Supplied as New
- Drive Shaft Material: Steel
- E-Waste: No
- Features and Benefits:
- 100% New Universal Joints Are Installed To Ensure Proper Fit And Optimal Performance.
- All Slip Yokes Are Lubricated To Prevent Premature Wear.
- Built To Match O.e. Form, Fit And Function.
- Units Are 100% Dynamically Balanced At 3200 Rpms For Vibration-free Operation And Increased Joint Life.
- Greasable: No
- Measurement Method: Measurement Taken From End Of Flange Face To End Of Flange Face
- Product Condition: New
- Tubing Outer Diameter (in): 2.01
- Tubing Outer Diameter (mm): 51
- Grade: Better
Vehicle | Submodel | Position |
---|---|---|
1999 Land Rover Discovery | Series II | Front |
2002 Land Rover Discovery | Front | |
2001 Land Rover Discovery | Front | |
2000 Land Rover Discovery | Front |
Cardone
Driveshaft / Prop Shaft - Drive Shaft - Front Cardone
Driveshaft / Prop Shaft - Front
with 27-7/8" (708 mm) Long Driveshaft Measurement taken from end of CV joint flange face to end of CV joint flange face Supplied as New
- Drive Shaft Material: Steel
- E-Waste: No
- Features and Benefits:
- 100% New Universal Joints Are Installed To Ensure Proper Fit And Optimal Performance.
- All Slip Yokes Are Lubricated To Prevent Premature Wear.
- Built To Match O.e. Form, Fit And Function.
- Units Are 100% Dynamically Balanced At 3200 Rpms For Vibration-free Operation And Increased Joint Life.
- Greasable: No
- Measurement Method: Tube Length Only. Measure Centerline Of Weld To Centerline Of Opposite Weld
- Product Condition: New
- Tubing Outer Diameter (in): 2.01
- Tubing Outer Diameter (mm): 51
- Grade: Better
Vehicle | Drive Type | Position | Block | Engine | CID | CC |
---|---|---|---|---|---|---|
2007 Jeep Liberty | 4WD | Front | V | 6 Cyl 3.7L | 226 | - |
2006 Jeep Liberty | 4WD | Front | V | 6 Cyl 3.7L | 226 | - |
2005 Jeep Liberty | 4WD | Front | V | 6 Cyl 3.7L | 226 | - |
Cardone
Driveshaft / Prop Shaft - Drive Shaft - Front Cardone
Driveshaft / Prop Shaft - Front
with 31-13/16" (808 mm) Long Driveshaft Measurement taken from end of flange face to end of flange face Supplied as New
- Drive Shaft Material: Steel
- E-Waste: No
- Features and Benefits:
- 100% New Universal Joints Are Installed To Ensure Proper Fit And Optimal Performance.
- All Slip Yokes Are Lubricated To Prevent Premature Wear.
- Built To Match O.e. Form, Fit And Function.
- Units Are 100% Dynamically Balanced At 3200 Rpms For Vibration-free Operation And Increased Joint Life.
- Greasable: No
- Measurement Method: Measurement Taken From End Of Flange Face To End Of Flange Face
- Product Condition: New
- Tubing Outer Diameter (in): 2.5
- Tubing Outer Diameter (mm): 63.5
- Grade: Better
Vehicle | Transmission | Position | Block | Engine | CID | CC |
---|---|---|---|---|---|---|
2009 Dodge Ram 2500 | Automatic | Front | V | 8 Cyl 5.7L | 345 | - |
2010 Dodge Ram 2500 | Automatic | Front | L | 6 Cyl 6.7L | 408 | - |
2007 Dodge Ram 2500 | Automatic | Front | L | 6 Cyl 6.7L | 408 | - |
2007 Dodge Ram 3500 | Automatic | Front | V | 8 Cyl 5.7L | 345 | - |
2008 Dodge Ram 3500 | Automatic | Front | L | 6 Cyl 6.7L | 408 | - |
2011 Ram 2500 | Automatic | Front | L | 6 Cyl 6.7L | 408 | - |
2013 Ram 2500 | Automatic | Front | V | 8 Cyl 5.7L | 345 | - |
2011 Ram 2500 | Automatic | Front | V | 8 Cyl 5.7L | 345 | - |
2013 Ram 2500 | Automatic | Front | V | 8 Cyl 4.7L | 287 | - |
2012 Ram 2500 | Automatic | Front | V | 8 Cyl 4.7L | 287 | - |
2011 Ram 2500 | Automatic | Front | V | 8 Cyl 4.7L | 287 | - |
Cardone
Driveshaft / Prop Shaft - Drive Shaft - Rear Cardone
Driveshaft / Prop Shaft - Rear
with 75-7/8" (1926 mm) Long Driveshaft with 241 Transfer Case Supplied as New Measurement taken from end of input shaft to center of U-Joint
- Drive Shaft Material: Steel
- E-Waste: No
- Features and Benefits:
- 100% New Universal Joints Are Installed To Ensure Proper Fit And Optimal Performance.
- All Slip Yokes Are Lubricated To Prevent Premature Wear.
- Built To Match O.e. Form, Fit And Function.
- Units Are 100% Dynamically Balanced At 3200 Rpms For Vibration-free Operation And Increased Joint Life.
- Greasable: No
- Measurement Method: Measurement Taken From End Of Cv Joint Flange Face To End Of Cv Joint Flange Face
- Product Condition: New
- Tubing Outer Diameter (in): 1.75
- Tubing Outer Diameter (mm): 44.45
- Grade: Better
Vehicle | Drive Type | Wheel FeedBase | Position |
---|---|---|---|
2002 Chevrolet Silverado 1500 | 4WD | 143.5 | Rear |
2001 Chevrolet Silverado 1500 | 4WD | 143.5 | Rear |
2003 Chevrolet Silverado 2500 | 4WD | Rear | |
2002 Chevrolet Silverado 2500 | 4WD | Rear | |
2003 Chevrolet Silverado 2500 HD | 4WD | Rear | |
2001 Chevrolet Silverado 2500 HD | 4WD | Rear | |
2003 Chevrolet Silverado 3500 | 4WD | Rear | |
2003 GMC Sierra 2500 | 4WD | Rear | |
2002 GMC Sierra 2500 HD | 4WD | Rear |
Vehicle | Drive Type | Wheel FeedBase | Position |
---|---|---|---|
2001 Chevrolet Silverado 1500 HD | 4WD | Rear | |
2003 GMC Sierra 1500 HD | 4WD | Rear |
Cardone
Driveshaft / Prop Shaft - Drive Shaft - Front Cardone
Driveshaft / Prop Shaft - Front
with 24-1/4" (616 mm) Long Driveshaft Before 01/24/2007 Measurement taken from end of flange face to end of CV joint flange face Supplied as New
- Drive Shaft Material: Steel
- E-Waste: No
- Features and Benefits:
- 100% New Universal Joints Are Installed To Ensure Proper Fit And Optimal Performance.
- All Slip Yokes Are Lubricated To Prevent Premature Wear.
- Built To Match O.e. Form, Fit And Function.
- Units Are 100% Dynamically Balanced At 3200 Rpms For Vibration-free Operation And Increased Joint Life.
- Greasable: No
- Measurement Method: Measurement Is Taken From End Of Input Shaft To Center Of U-joint
- Product Condition: New
- Tubing Outer Diameter (in): 2.01
- Tubing Outer Diameter (mm): 50.93
- Grade: Better
Vehicle | Transmission | Trans. Speed | Drive Type | Position | Block | Engine | CID | CC |
---|---|---|---|---|---|---|---|---|
2004 Dodge Dakota | 4WD | Front | ||||||
2003 Dodge Dakota | 4WD | Front | ||||||
2002 Dodge Dakota | 4WD | Front | ||||||
2001 Dodge Dakota | 4WD | Front | ||||||
2006 Dodge Dakota | Automatic | 4 | 4WD | Front | V | 6 Cyl 3.7L | 226 | - |
2005 Dodge Dakota | Automatic | 4 | 4WD | Front | V | 6 Cyl 3.7L | 226 | - |
2006 Mitsubishi Raider | Manual | 6 | 4WD | Front | ||||
2006 Mitsubishi Raider | Automatic | 4 | 4WD | Front | V | 6 Cyl 3.7L | 226 | - |
Vehicle | Transmission | Trans. Speed | Drive Type | Position | Block | Engine | CID | CC |
---|---|---|---|---|---|---|---|---|
2007 Dodge Dakota | Automatic | 4 | 4WD | Front | V | 6 Cyl 3.7L | 226 | - |
Cardone
Driveshaft / Prop Shaft - Drive Shaft - Front Cardone
Driveshaft / Prop Shaft - Front
with 31-3/8" (796 mm) Long Driveshaft Measurement taken from end of CV joint flange face to end of CV joint flange face Supplied as New
- Drive Shaft Material: Steel
- E-Waste: No
- Features and Benefits:
- 100% New Universal Joints Are Installed To Ensure Proper Fit And Optimal Performance.
- All Slip Yokes Are Lubricated To Prevent Premature Wear.
- Built To Match O.e. Form, Fit And Function.
- Units Are 100% Dynamically Balanced At 3200 Rpms For Vibration-free Operation And Increased Joint Life.
- Greasable: No
- Measurement Method: Measurement Taken From End Of Cv Joint Flange Face To End Of Cv Joint Flange Face
- Product Condition: New
- Tubing Outer Diameter (in): 2.01
- Tubing Outer Diameter (mm): 51
- Grade: Better
Vehicle | Transmission | Fuel Type | Position | Block | Engine | CID | CC |
---|---|---|---|---|---|---|---|
2002 Jeep Grand Cherokee | Front | V | 8 Cyl 4.7L | 287 | - | ||
2001 Jeep Grand Cherokee | Front | V | 8 Cyl 4.7L | 287 | - | ||
2000 Jeep Grand Cherokee | Front | V | 8 Cyl 4.7L | 287 | - | ||
1999 Jeep Grand Cherokee | Front | V | 8 Cyl 4.7L | 287 | - | ||
2006 Jeep Liberty | Automatic | DIESEL | Front | L | 4 Cyl 2.8L | 171 | 2768 |
2005 Jeep Liberty | Automatic | DIESEL | Front | L | 4 Cyl 2.8L | 171 | 2768 |
Showing 1 – 10 products of 365 products